The following is from a news report about revisions of OSHA's Electrical Installation Standard (Subpart S of 29 CFR Part 1910) in EC&M Magazine:
"According to OSHA, 'The agency has determined that electrical hazards in the workplace pose a significant risk of injury or death to employees, and that the requirements in the revised standard, which draw heavily from the 2000 edition of the National Fire Protection Association's (NFPA) Electrical Safety Requirements for Employee Workplaces (NFPA 70E), and the 2002 edition of the National Electrical Code (NFPA 70), are reasonably necessary to provide protection from these hazards.'"
An OSHA press release provides additional information. It states:
"Changes to OSHA's general industry electrical installation standard focus on safety in the design and installation of electric equipment in the workplace. The updated standard includes a new alternative method for classifying and installing equipment in Class I hazardous locations; new requirements for ground-fault circuit interrupters (GFCIs) and new provisions on wiring for carnivals and similar installations."
"The final rule updates the general industry electrical installation requirements to the 2000 edition of the NFPA 70E, which was used as the foundation of the revised standard. The final rule also replaces the reference to the 1971 National Electrical Code in the mandatory appendix to the powered platform standard with a reference to OSHA's electrical installation standard."
You'll find the OSHA "Electrical Standard; Final Rule - 72:7135-7221" online at: http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=FEDERAL_REGISTER&p_id=19269
"According to OSHA, 'The agency has determined that electrical hazards in the workplace pose a significant risk of injury or death to employees, and that the requirements in the revised standard, which draw heavily from the 2000 edition of the National Fire Protection Association's (NFPA) Electrical Safety Requirements for Employee Workplaces (NFPA 70E), and the 2002 edition of the National Electrical Code (NFPA 70), are reasonably necessary to provide protection from these hazards.'"
An OSHA press release provides additional information. It states:
"Changes to OSHA's general industry electrical installation standard focus on safety in the design and installation of electric equipment in the workplace. The updated standard includes a new alternative method for classifying and installing equipment in Class I hazardous locations; new requirements for ground-fault circuit interrupters (GFCIs) and new provisions on wiring for carnivals and similar installations."
"The final rule updates the general industry electrical installation requirements to the 2000 edition of the NFPA 70E, which was used as the foundation of the revised standard. The final rule also replaces the reference to the 1971 National Electrical Code in the mandatory appendix to the powered platform standard with a reference to OSHA's electrical installation standard."
You'll find the OSHA "Electrical Standard; Final Rule - 72:7135-7221" online at: http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=FEDERAL_REGISTER&p_id=19269
0 Comments:
Post a Comment
Links to this post:
Create a Link
<< Home